Call 206-783-1696
SikaDamp® 630 is sold by the case (20 sheets) for $250 or half case (10 sheets) for $125. Individual sheets are $12.50 each. We ship nationwide.
Experienced plumbers and builders trust SikaDamp® 630 to muffle noisy pipes, sewer lines & ductwork. Just as important, these peel and stick accoustic pads are affordable and easy to use. The 12 x 24 inch sheets feature twin layers of butyl rubber acoustic pads. They're heat resistant, flexible, non-curing and lightweight with a self-adhesive mastic. They can be painted and cut into custom shapes for different applications, especially sound insulation for pipes.
Plumbing
Plumbers and builders love SikaDamp® 630. It's an easy way to reduce noise in pipes, sewage lines and other conduits. The aluminum foil peel and stick sheets are thin and flexible. They can be cut to size and molded to any shape.
Better yet, SikaDamp® 630 sheets stick to almost any surface. The peel strength of SikaDamp® 630 easily outperforms conventional felted asphalt dampers. The super adhesion and conformability of SikaDamp® results in maximum surface contact, critical for high performance damping. Click here for application instructions.
Technical Specs
SikaDamp® 630 self-stick sound dampening sheets are an easy, effective way to reduce noise in cars, boats and plumbing.
- General: Paintable aluminium top
- Cost: $12.50 per sheet for ten or more
- Size: 12" x 24" x .078" sheets, .58psf
- Odor: No toxic or noxious odors
SikaDamp® 630 is heat resistant. It can withstand continuous exposure up to 250° F. It's self extinguishing per FMVSS 302. Click here for additonal specs.
Other Uses
We've found SikaDamp® 630 (part 90934) sound dampening sheets are an effective way to muffle automotive road noise and engine vibration. It won't elminate sounds, but it dramatically reduces them.
To get a better idea how it works, try this experiment. Tap your knuckles on the outside of a car door panel. Next, place the palm of your other hand on the same door panel. Keeping your palm in place, tap the door like you did the first time. The difference in pitch and volume gives you an idea how SikaDamp® 630 works.
DIY Soundproofing
If you want to know how to muffle noisy water pipes, SikaDamp® 630 is the answer. It's easy to use and specifically manufactured for drain pipe soundproofing and water pipe sound insulation. Put simply, SikaDamp® 630 sound dampening material is a proven way to muffle water pipe and conduit noise. Click here for product specs.
Noisy Air Ducts
Cover noisy air ducts, heat pumps and air conditioners with peel and stick SikaDamp®. The aluminum surface blends right into most standard ductwork. Click here for application instructions.
Specs & Product Details
Call 206-783-1696 to order SikaDamp® 630 peel & stick sound dampening sheets. Click here for application instructions.
Surface Preparation
For best results, surfaces should be clean and free from grease, oil and dust. SikaDamp® 630 has tackifying agents that help it adhere to almost any surface.
Adhesion & Durability
SikaDamp® 630 has demonstrated excellent adhesion to CRS, galvanized and galvanneal steel, ELPO and basecoat and clearcoat body panels.
Its outstanding adhesive performance allows it to maintain its position in the most demanding vertical and inverted applications, even at elevated paint bake temperatures. SikaDamp® 630 maintains its acoustic and adhesive properties after subjection to the various test conditions used in the automotive industry.
Acoustic Performance
SikaDamp® 630 (part 90934) is a technologically advanced formulation that offers superior damping performance at a reduced weight over traditional mastic constrained layer and asphaltic extensional dampers. The damping performance is maintained from –10°C to 60°C allowing use in any area of the vehicle.
Material Properties |
|
| Appearance: | Tacky mastic with aluminum |
| Color: | Black & Silver |
| Specific Gravity: | 1.03 +/- 0.05 |
| Non-Volatile Content: | 99% minimum |
| Flash Point: | 248°C |
| Flammability: | Passes with a rating of B < 1.0 |
| Peel Adhesion: | OCRS 7-10 pli avg. ED Coat 7-10 pli avg. |
| Application Temperature: | 15°C to 43°C recommended |
| Corrosion Resistance: | Resistant to water and salt |
| Shelf Life: | 3 years if stored below 35°C |
Safety and Handling Instructions
Caution: Always practice proper personal hygiene procedures after using this product. Consult the Material Safety Data Sheet for further safety and handing instructions.
For information and advice regarding transportation, handling, storage and disposal of chemical products, refer to the actual Material Safety Data Sheets containing physical, ecological, toxicological and other safety-related data.
Legal Notes
The information, and, in particular, the recommendations relating to the application and end-use of SikaDamp® 630, are given in good faith based on SikaDamp®'s current knowledge and experience of the products when properly stored, handled and applied under normal conditions.
In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The proprietary rights of third parties must be observed.
All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.
Application Instructions
SikaDamp® 630 peel & stick sound dampening sheets are easy to install. Simply follow these instructions.
-
Without removing the protective backing, align a sheet lengthwise along the pipe. Wrap it around the pipe.
-
In this example, a vertically aligned SikaDamp® sound dampening sheet is not wide enough to wrap the pipe.
If the sheet is not wide enough — if there's a gap in coverage — rotate the sheet 90° to better cover the pipe.
-
Without removing the protective backing, check the sheet for fit by wrapping it around the pipe.
After determining the sheet fully covers the pipe, you may trim off any excess material using a scissors or knife.
Peel off the protective backing covering the adhesive. The sticky side will adhere to almost any clean surface.
Apply the sticky side of the SikaDamp® 630 sheet to the pipe. Wrap the sheet around the pipe until it's covered.
Repeat the proceedure using additional sheets until the pipe is covered top to bottom. It couldn't be easier!
Contact Us
Call 206-783-1696 | Send Email